FESKS FA-223 is a professional-grade water quality monitoring equipment precision machined from high-quality acrylic materials.
FESKS FA-223 is a professional-grade water quality monitoring equipment precision machined from high-quality acrylic materials. This product has the following core characteristics:
material properties
Made of 4mm thick high-light transmission acrylic plate
Acid and alkali corrosion resistance (PH2-12)
Operating temperature range 0-60℃
Light transmittance ≥92%
functional design
Built-in constant flow control system, adjustable flow rate (0.5-3L/min)
Standard electrode interface design, compatible with mainstream brand sensors
Support simultaneous installation of PH, dissolved oxygen, conductivity, and residual chlorine electrode
Optimize flow channel design to avoid bubble accumulation
Technical parameters
Overall size: 200×150× 120mm
Working pressure: ≤0.1MPa
Connection method: PG13.5 male thread
Weight: approximately 0.3kg
application scenarios
This product is widely used in:
Online monitoring of residual chlorine in waterworks
Swimming pool water quality monitoring system
Medical wastewater process control
Laboratory Water Quality Analysis and Research
installation instructions
Fix the flow channel horizontally at the monitoring point
Connect the inlet and outlet pipes (it is recommended to use inlet Φ6 and outlet Φ8PE pipes)
Install electrode sensors on demand
After system calibration, it can be put into use
FESKS FA-223 is a professional-grade water quality monitoring equipment precision machined from high-quality acrylic materials. This product has the following core characteristics:
material properties
Made of 4mm thick high-light transmission acrylic plate
Acid and alkali corrosion resistance (PH2-12)
Operating temperature range 0-60℃
Light transmittance ≥92%
functional design
Built-in constant flow control system, adjustable flow rate (0.5-3L/min)
Standard electrode interface design, compatible with mainstream brand sensors
Support simultaneous installation of PH, dissolved oxygen, conductivity, and residual chlorine electrode
Optimize flow channel design to avoid bubble accumulation
Technical parameters
Overall size: 200×150× 120mm
Working pressure: ≤0.1MPa
Connection method: PG13.5 male thread
Weight: approximately 0.3kg
application scenarios
This product is widely used in:
Online monitoring of residual chlorine in waterworks
Swimming pool water quality monitoring system
Medical wastewater process control
Laboratory Water Quality Analysis and Research
installation instructions
Fix the flow channel horizontally at the monitoring point
Connect the inlet and outlet pipes (it is recommended to use inlet Φ6 and outlet Φ8PE pipes)
Install electrode sensors on demand
After system calibration, it can be put into use
