The integrated ultrasonic liquid level meter FLEV 200adopts ultrasonic measurement technology. In the measurement, the ultrasonic pulse is emitted by the sensor, and the sound wave is received by the same sensor after being reflected by the liquid surface, which is converted into an electrical signal through the piezoelectric crystal, and the distance between the sensor and the measured liquid surface is calculated from the time between the emission and reception of the sound wave.
FESKS Fisk's.Integrated ultrasonic liquid level meterFLEV 200By using the ultrasonic measurement technology, the ultrasonic pulse is emitted by the sensor, and the sound wave is reflected by the liquid surface. A sensor receives it, converts it into an electrical signal through a piezoelectric crystal, and is emitted by sound waves The time between the sensor and the receiver is used to calculate the distance from the sensor to the surface of the liquid under test. Due to the use of non-contact measurement, the tested medium is almost unrestricted and can be widely used in all kinds of Measurement of the height of liquid and solid materials.
Applied to: measuring liquid level height and liquid level distance FromSuch as: waterworks, sewage treatment plants, water conservancy and other liquid level / material level measurement.
Integrated ultrasonic liquid level meterFLEV 200Featur
▶ Sound wave intelligent technology
▶ High accuracy of liquid level measurement
▶ Resist all kinds of interference waves without direct contact with liquid, so the failure rate is low.
▶ Cast aluminum material
▶ A variety of installation methods, easy to install and built in
▶ temperature sensor
Integrated ultrasonic liquid level meterFLEV 200Parameters
Model | FLEV 200 |
Measuring range | 0mm 6m 0m 15m |
Blind area | 0.25~0.6m |
Resolution | 1mm |
Precision degree | ±0.2%F.S |
Display | LCD |
Ambient temperature | -20 years old 70 ℃ |
pressure | Atmospheric pressure |
working environment temperature | 0 million 70 ℃ |
Power source | 24VDC |
current output | 2 wire system: 4 "20 mA,4 line system: 4" 20 mA+RS485 Modbus+2 circuit relay |
material | aluminum/ stainless steel / PVDF |
Protection grade | IP67 |
explosion-proof grade | customizable |
Process interface | G2" |
Weight | 2.6 kg |
Size | 160 mm*128 mm*243 mm |
Application | liquid/ solid |
FLEV 200installation schematic diagram
Order information
Order number | Description |
55-0200-06 | Two-wire integrated ultrasonic liquid level gauge 6m |
55-0200-15 | Two-wire integrated ultrasonic liquid level gauge 15m |
55-0200-46 | Four-wire integrated ultrasonic liquid level gauge 6m |
55-0200-55 | Four-wire integrated ultrasonic liquid level gauge 15m |
20-0200-00 | 304 stainless steel mounting bracket |
FESKS Fisk's.Integrated ultrasonic liquid level meterFLEV 200By using the ultrasonic measurement technology, the ultrasonic pulse is emitted by the sensor, and the sound wave is reflected by the liquid surface. A sensor receives it, converts it into an electrical signal through a piezoelectric crystal, and is emitted by sound waves The time between the sensor and the receiver is used to calculate the distance from the sensor to the surface of the liquid under test. Due to the use of non-contact measurement, the tested medium is almost unrestricted and can be widely used in all kinds of Measurement of the height of liquid and solid materials.
Applied to: measuring liquid level height and liquid level distance FromSuch as: waterworks, sewage treatment plants, water conservancy and other liquid level / material level measurement.
Integrated ultrasonic liquid level meterFLEV 200Featur
▶ Sound wave intelligent technology
▶ High accuracy of liquid level measurement
▶ Resist all kinds of interference waves without direct contact with liquid, so the failure rate is low.
▶ Cast aluminum material
▶ A variety of installation methods, easy to install and built in
▶ temperature sensor
Integrated ultrasonic liquid level meterFLEV 200Parameters
Model | FLEV 200 |
Measuring range | 0mm 6m 0m 15m |
Blind area | 0.25~0.6m |
Resolution | 1mm |
Precision degree | ±0.2%F.S |
Display | LCD |
Ambient temperature | -20 years old 70 ℃ |
pressure | Atmospheric pressure |
working environment temperature | 0 million 70 ℃ |
Power source | 24VDC |
current output | 2 wire system: 4 "20 mA,4 line system: 4" 20 mA+RS485 Modbus+2 circuit relay |
material | aluminum/ stainless steel / PVDF |
Protection grade | IP67 |
explosion-proof grade | customizable |
Process interface | G2" |
Weight | 2.6 kg |
Size | 160 mm*128 mm*243 mm |
Application | liquid/ solid |
FLEV 200installation schematic diagram
Order information
Order number | Description |
55-0200-06 | Two-wire integrated ultrasonic liquid level gauge 6m |
55-0200-15 | Two-wire integrated ultrasonic liquid level gauge 15m |
55-0200-46 | Four-wire integrated ultrasonic liquid level gauge 6m |
55-0200-55 | Four-wire integrated ultrasonic liquid level gauge 15m |
20-0200-00 | 304 stainless steel mounting bracket |
