High turbidity SS KSNT 535

high turbidity/Suspended matter sensor KSNT535 type uses90º scattered lightPrinciple. By guiding the light emitted by the light source downward into the water sample in the sensor, the light is scattered by suspended particulate matter in the water sample, and is equal to the angle of incidence.The 90-degree scattered light is received by a silicon photovoltaic receiver immersed in the water sample, and the turbidity value of the water sample is obtained by calculating the relationship between the 90-degree scattered light and the incident light beam.

☞ Supporting controller:FSTN 5320-H Controller

KSNT 535 Features:

◆ 850nm scattering principle is adopted.

◆ Use formazine correction to integrate cost-effective optical technology.

◆ The sensor can store calibration values and use them for measurement.

◆ Excellent anti-corrosion and anti-interference performance

◆ Used in urban wastewater treatment, surface water testing, drinking water measurement, etc.

KSNT535 parameters:

◆ Measuring range:0.0-1000.0 NTU0.0-4000.0 NTU, 0.0-4500.0mg/L

◆ Measurement accuracy: 15% below 20NTU, 5% above 20NTU

◆ Temperature range:0-60°℃

◆ Maximum data update time:

◆ Installation method: bare wire ◆ Electric continuation: standard 7 meters

◆ size: medium diameter 27x150mm

◆ Maximum pressure:5bars

◆ Communication protocol:MobdusRS-485

◆ Power supply:12V

◆ Material:PVC, DELRIN, Quartz, PMMA, Polyamide

Order description