Silica FOSTCO 5000 Sio2 is a compact analyzer that automatically monitors silica concentration in water using colorimetric methods
British FESKS Fiske SilicaFOSTCO 5000 Sio2， It is a compact analyzer that automatically monitors the concentration of silica in water using colorimetric methods. Color reactions are produced by adding chemicals to water samples. Calculate the silicate concentration in the water based on the color change of the reagent sample. The instrument has a built-in self-calibration program, making it a reliable, accurate and fully automatic analyzer.
Applied in: power plants, pharmaceutical industry, measurement of silica in ultrapure water, boiler water, condensate water, reverse osmosis, and deionized water.
Product features:
→ Photometric colorimetric measurement
→ Imported products, reliable, accurate and fully automatic analyzer
→ Monitor two programmable limits
→ Simple debugging through the configuration wizard
→ Automatic calibration, automatic diagnosis and automatic measurement
→ Compact design for easy maintenance and cleaning
→ Multi-lingual, multi-color LED display
→ Relay output of error message
→ Analog output 0/4 - 20 mA, digital output RS 485
→ Digital inputs for starting analysis, flow switches, or interval relocations
→ Measurement data memory and measurement data protocol on SD card
→ Update software via SD card
Technical parameters
Parameters. | silica |
Measuring method | photometric colorimetry |
Measuring range | The measuring range of Silicate-A, Silicate-B and Silicate-C reagents is 0.3 - 10 mg/l |
Precision of measurement | The ± value is 5% of the maximum reading of the reagent used respectively |
current accuracy | ±0.3mA |
reagent consumption | Approximately 0.05- 0.5 ml/analysis, depending on the measured water silica concentration |
analysis time | Approximately 15 minutes, depending on the set washing time |
Number of analyses | Reagent A: approximately 500 analyses/ 500 ml reagent, Reagents B and C: approximately 1000 analyses/ 500 ml reagent each |
Reagent shelf life | Can be stored for 2 years under correct storage conditions ( |
water consumption | Approximately 1 liter/analysis, with 2 bar, and the amount of water depends on the inlet pressure and the set flushing time. |
relay output | 4-way relay, maximum load of 250V 4A(alarm, pre-alarm, fault, missing indication, analysis contact) |
signal input | 2 inputs, maximum load 18V 12mA, stop or start analysis |
Analog output | 0-20mA/4-20 mA resolution: |
Digital output | RS 485 Modbus RTU protocol |
supply voltage | 85 - 264 VAC (47... 440 Hz), 24V AC/DC optional |
Power consumption | 30W (in operation), 8W in measurement, 3.5W(standby) |
load capacity | Load capacity of relay with internal current of 1A at terminals 1 to 4 External power supply load capacity 2.5 A |
size/weight | 600 x 488 x 255 mm (W x H x D), approximately 8.7kg |
Storage temperature | 0°C-45℃ |
Ambient temperature | 10°C-45 ℃ |
measure water temperature | 5°C-40℃ |
Protection grade | IP56 |
water quality requirements: General inlet water: pressure min: 0.5 bar - max: 5 bar /recommended 1 - 2 bar, transparent, solid-free, bubble-free, and odor-free
Water quality requirements when measuring silica in water:pH: 9 - 10, iron: < 3 ppm, copper: < 0.2 ppm, aluminum: < 0.1 ppm, manganese: < 0.2 ppm
online silica analyzerFOSTCO 5000 Sio2 ordering information
Order number | Model | Description |
60-5000-10 | FOSTCO 5000 Sio2 | silica analyzer |
200945 | FR 3000 | Reagent group 1, reagent A×2 bottles, reagent B×1 bottle, reagent C×1 bottle, bottle/500ml |
British FESKS Fiske SilicaFOSTCO 5000 Sio2， It is a compact analyzer that automatically monitors the concentration of silica in water using colorimetric methods. Color reactions are produced by adding chemicals to water samples. Calculate the silicate concentration in the water based on the color change of the reagent sample. The instrument has a built-in self-calibration program, making it a reliable, accurate and fully automatic analyzer.
Applied in: power plants, pharmaceutical industry, measurement of silica in ultrapure water, boiler water, condensate water, reverse osmosis, and deionized water.
Product features:
→ Photometric colorimetric measurement
→ Imported products, reliable, accurate and fully automatic analyzer
→ Monitor two programmable limits
→ Simple debugging through the configuration wizard
→ Automatic calibration, automatic diagnosis and automatic measurement
→ Compact design for easy maintenance and cleaning
→ Multi-lingual, multi-color LED display
→ Relay output of error message
→ Analog output 0/4 - 20 mA, digital output RS 485
→ Digital inputs for starting analysis, flow switches, or interval relocations
→ Measurement data memory and measurement data protocol on SD card
→ Update software via SD card
Technical parameters
Parameters. | silica |
Measuring method | photometric colorimetry |
Measuring range | The measuring range of Silicate-A, Silicate-B and Silicate-C reagents is 0.3 - 10 mg/l |
Precision of measurement | The ± value is 5% of the maximum reading of the reagent used respectively |
current accuracy | ±0.3mA |
reagent consumption | Approximately 0.05- 0.5 ml/analysis, depending on the measured water silica concentration |
analysis time | Approximately 15 minutes, depending on the set washing time |
Number of analyses | Reagent A: approximately 500 analyses/ 500 ml reagent, Reagents B and C: approximately 1000 analyses/ 500 ml reagent each |
Reagent shelf life | Can be stored for 2 years under correct storage conditions ( |
water consumption | Approximately 1 liter/analysis, with 2 bar, and the amount of water depends on the inlet pressure and the set flushing time. |
relay output | 4-way relay, maximum load of 250V 4A(alarm, pre-alarm, fault, missing indication, analysis contact) |
signal input | 2 inputs, maximum load 18V 12mA, stop or start analysis |
Analog output | 0-20mA/4-20 mA resolution: |
Digital output | RS 485 Modbus RTU protocol |
supply voltage | 85 - 264 VAC (47... 440 Hz), 24V AC/DC optional |
Power consumption | 30W (in operation), 8W in measurement, 3.5W(standby) |
load capacity | Load capacity of relay with internal current of 1A at terminals 1 to 4 External power supply load capacity 2.5 A |
size/weight | 600 x 488 x 255 mm (W x H x D), approximately 8.7kg |
Storage temperature | 0°C-45℃ |
Ambient temperature | 10°C-45 ℃ |
measure water temperature | 5°C-40℃ |
Protection grade | IP56 |
water quality requirements: General inlet water: pressure min: 0.5 bar - max: 5 bar /recommended 1 - 2 bar, transparent, solid-free, bubble-free, and odor-free
Water quality requirements when measuring silica in water:pH: 9 - 10, iron: < 3 ppm, copper: < 0.2 ppm, aluminum: < 0.1 ppm, manganese: < 0.2 ppm
online silica analyzerFOSTCO 5000 Sio2 ordering information
Order number | Model | Description |
60-5000-10 | FOSTCO 5000 Sio2 | silica analyzer |
200945 | FR 3000 | Reagent group 1, reagent A×2 bottles, reagent B×1 bottle, reagent C×1 bottle, bottle/500ml |
