The FOSTCO 6000 IN Water Oil Analyzer has been developed specifically to measure hydrocarbons in clean water. Optical sensors are used to measure absorbed and scattered light in the sample stream. The measurement method distinguishes between oil droplets and turbidity. The microprocessor calculates the oil concentration in ppm based on the sensor signal
Imported with original packaging, quality assurance
Oil analyzer in waterFOSTCO 6000 IN Developed specifically for measuring hydrocarbon content in clean water. Optical sensors are used to measure absorbed and scattered light in the sample stream. The measurement method distinguishes between oil droplets and turbidity. The microprocessor calculates based on the sensor signalOil concentration of ppm. The analyzer continuously measures the concentration of the oil and activates alarms and relays when necessary.
Application scope: Including boiler condensate reflux, process cooling water, process steam monitoring and wastewater.
Product characteristics
→ Compact design
→ Direct calibration with clean water
→ Wide range analysis: 0-99ppm
→ Automatic and continuous self-diagnosis
→ Turbidity compensation
→ Rapid response
→ Minimum maintenance required
→ Automatic operation, automatic calculation, button control
→ Optional configuration of automatic cleaning system
Technical parameters
Parameters. | Value/Scope |
Measuring method | scattered light method |
Measuring range | 0-99 ppm |
supply voltage | 230/115 VAC(50-60 Hz) or 24 VDC |
ambient humidity | max.90% |
Ambient temperature | 1-60℃ |
Water sample temperature | 1-40℃ |
sample flow rate | 0.1-2.0 I/min |
water pressure | 0,1-10,0 bar |
Precision. | +/-2 ppm |
analysis time | About8-10 min |
Calibrating | Direct calibration with clean water |
Call the police | Two adjustable operating delay alarms(0-60s、10-240s); |
Analog output | 0-20 mA,4-20mA or0-5 VDCo 1-5 VDC |
water quality requirements | Transparent, no suspended matter,pH:3-12 |
reagent consumption | None |
Size/Weight | 215×242×73(depth)mm approx. 2,30 kg |
Protection grade | IP65 |
Order information
Order number | Model | Description |
60-6000-00 | Fostco 6000 IN | Online oil analyzer in water |
Imported with original packaging, quality assurance
Oil analyzer in waterFOSTCO 6000 IN Developed specifically for measuring hydrocarbon content in clean water. Optical sensors are used to measure absorbed and scattered light in the sample stream. The measurement method distinguishes between oil droplets and turbidity. The microprocessor calculates based on the sensor signalOil concentration of ppm. The analyzer continuously measures the concentration of the oil and activates alarms and relays when necessary.
Application scope: Including boiler condensate reflux, process cooling water, process steam monitoring and wastewater.
Product characteristics
→ Compact design
→ Direct calibration with clean water
→ Wide range analysis: 0-99ppm
→ Automatic and continuous self-diagnosis
→ Turbidity compensation
→ Rapid response
→ Minimum maintenance required
→ Automatic operation, automatic calculation, button control
→ Optional configuration of automatic cleaning system
Technical parameters
Parameters. | Value/Scope |
Measuring method | scattered light method |
Measuring range | 0-99 ppm |
supply voltage | 230/115 VAC(50-60 Hz) or 24 VDC |
ambient humidity | max.90% |
Ambient temperature | 1-60℃ |
Water sample temperature | 1-40℃ |
sample flow rate | 0.1-2.0 I/min |
water pressure | 0,1-10,0 bar |
Precision. | +/-2 ppm |
analysis time | About8-10 min |
Calibrating | Direct calibration with clean water |
Call the police | Two adjustable operating delay alarms(0-60s、10-240s); |
Analog output | 0-20 mA,4-20mA or0-5 VDCo 1-5 VDC |
water quality requirements | Transparent, no suspended matter,pH:3-12 |
reagent consumption | None |
Size/Weight | 215×242×73(depth)mm approx. 2,30 kg |
Protection grade | IP65 |
Order information
Order number | Model | Description |
60-6000-00 | Fostco 6000 IN | Online oil analyzer in water |
